Connection Settings; Host Name - Panasonic KX-UTG200 Setup Manual

4.3.1 Basic Network Settings

4.3.1.1 Connection Settings

Host Name

Description
Value Range
Default Value
IP Address Mode
Description
Value Range
Default Value
Configuration File Reference
Signal Prefer Mode
Description
Value Range
Default Value
Configuration File Reference
Media Prefer Mode
Description
Value Range
Default Value
Configuration File Reference
96 Administrator Guide
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when [IP Connection Mode] is
set to [DHCP].
Max. 63 characters
Note
•
You cannot leave this field empty.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
{MODEL}
Specifies whether the unit operates in IPv4 mode, IPv6 mode, or both.
•
IPv4 only
•
IPv6 only
•
Dual stack
Dual stack
IP_ADDR_MODE (Page 270)
Specifies the preferred IP mode (IPv4 or IPv6) for sending SIP packets.
•
IPv4
•
IPv6
IPv4
IP_MODE_PREF_SIGNAL (Page 271)
Specifies the preferred IP mode (IPv4 or IPv6) for sending voice
packets (RTP).
•
IPv4
•
IPv6
IPv4
IP_MODE_PREF_MEDIA (Page 271)
Document Version 2015-01