4.9.7 Make Call
4.9.6 Status Message
This screen allows you to check the status message of the unit. Click [Refresh] to refresh the displayed
messages.
4.9.7 Make Call
This screen allows you to make calls from the web user interface using a specified line. This is useful when
you want to perform debugging from a remote site via the web user interface.
4.9.7.1 Make Call
Line No.
Description
Value Range
Default Value
218
Administrator Guide
Specifies the line to be used when making a call.
Note
•
The available line number varies depending on the type of the
unit being used.
•
Line 1–Line 4 (for KX-UTG200)
•
Line 1–Line 6 (for KX-UTG300)
Not applicable.
Document Version 2015-01