Web Server Settings; Web Server Port - Panasonic KX-UTG200 Setup Manual

4.4.4 Web Server Settings

Value Range
Default Value
Configuration File Reference
4.4.4 Web Server Settings
This screen allows you to change the Web server settings.
4.4.4.1 Web Server Settings

Web Server Port

Description
Value Range
Default Value
116 Administrator Guide
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in [New
Password].
Not stored.
USER_PASS (Page 245)
Specifies the port number used by the Web server.
80, 1024–49151
Note
•
You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 4.5.1.6 SIP Source Port.
80
Note
•
When you change the default value of the port number to a
value other than "80", such as "8080", enter the URL for
accessing the Web user interface using the following format:
"http://192.168.0.100:8080/"
(192.168.0.100: IP address of the unit)
Document Version 2015-01