5.6.8 Tone Settings
Default Value
BUSY_TONE_RPT
Value Format
Description
Value Range
Default Value
BUSY_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RINGBACK_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RINGBACK_TONE_GAIN
Value Format
Description
Value Range
304
Administrator Guide
0
Boolean
Specifies whether the busy tone is repeated.
•
Y/Yes (Repeat)
•
N/No (No Repeat)
Y
Comma-separated Integer
Specifies the pattern, in milliseconds, of busy tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,500,440
Tone Timings (Page 159)
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
440,480
Tone Frequencies (Page 160)
Integer
Specifies the gain, in decibels, of the ringback tone.
(-80)–0
Document Version 2015-01