4.6.6 Tone Settings
4.6.6.3 Ringing Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.6.6.4 Stutter Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
148
Administrator Guide
Specifies the dual-tone frequencies, in hertz, of ringback tones using
2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "440,480", the unit will use a
mixed signal of a 440 Hz tone and a 480 Hz tone.
440,480
RINGBACK_TONE_FRQ
Specifies the pattern, in milliseconds, of ringback tones using up to
10 whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
RINGBACK_TONE_TIMING
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated
by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a
mixed signal of a 350 Hz tone and a 440 Hz tone.
350,440
DIAL_TONE4_FRQ
Document Version: 2017-07