Direct Commands - Panasonic KX-UTG200 Setup Manual

Main Menu Item
Application Settings
Network Test
Change Level
Reset
Restart
*1 The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.

3.1.2 Direct Commands

The following table shows additional features programmable with direct commands. These commands are
hidden from end users.
Direct
Command
[#][1][3][6]
[#][5][3][4]
[#][5][9][0]
[#][6][1][1]
[#][6][2][2]
Only available for the KX-UTG300.
*1
Only available for the KX-UTG300 when there is a connected USB flash drive.
*2
Note
•
Key combinations for direct commands can be customized. See the following for more information.
–
Resetting the unit: DIR_CMD_FACTORY_RESET (Page 296)
–
Embedded web: DIR_CMD_ENABLE_EMBEDDED_WEB (Page 296)
–
Port Mirroring: DIR_CMD_ENABLE_PORT_MIRROR (Page 296)
–
Disable the touch screen: DIR_CMD_DISABLE_TOUCH_SCREEN (Page 296)
Document Version 2015-01
Resetting the unit
Embedded web
Port Mirroring
Disable the touch screen
Export phone user interface settings
Sub Menu Item
Speed/Duplex
Embedded Web
Port Mirroring
HTTP Authentication
Provisioning
Multicast Paging
Exclude Private Settings
Exclude Network Settings
Feature
*1
*2
3.1.2 Direct Commands
—
—
—
—
Page 37
Page 32
Page 66
Page 66
Page 66
Administrator Guide
Access
Level
*1
U A
ü
ü ü
ü ü
ü
ü
ü ü
ü ü
ü ü
ü ü
ü ü
ü ü
ü ü
Ref.
65