Ipv6 Settings - Panasonic KX-UTG200 Setup Manual

5.5.2 IPv6 Settings

Default Value
STATIC_DNS2_SVR
Value Format
Description
Value Range
Default Value
DHCP_INFORM_ENABLE
Value Format
Description
Value Range
Default Value
HOST_NAME
Value Format
Description
Value Range
Default Value
5.5.2 IPv6 Settings
IP_ADDR_MODE
Value Format
Description
Value Range
Default Value
270 Administrator Guide
Empty string
String
Specifies the IP address of the secondary DNS server.
Note
•
This setting is available only when "DHCP_ENABLE" is set to
"N".
Max. 15 characters (IP address in dotted-decimal notation)
Empty string
Boolean
Specifies whether or not to send DHCP INFORM packets.
•
Y/Yes (Send DHCP INFORM packet out to request information)
•
N/No (Do not send DHCP INFORM packet)
N
String
Specifies host name of the device.
0-64 characters
{MODEL}
Integer
Specifies the IP address mode.
0-2
–
0: IPv4
–
1: IPv6
–
2: dual
2
Document Version 2015-01