5.4.1 Login Account Settings
Value Range
Default Value
5.4 System Settings
5.4.1 Login Account Settings
ADMIN_ID
Value Format
Description
Value Range
Default Value
244
Administrator Guide
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
•
If this URL ends with "/" (slash), "sip.cfg" is automatically added
at the end of the URL.
For example, CFG_MASTER_FILE_PATH="http://host/
dir/" becomes CFG_MASTER_FILE_PATH="http://
host/dir/sip.cfg".
Empty string
Note
•
The URL specified by your phone system dealer may be preset
in the unit.
String
Specifies the account ID used to access the Web user interface with
the Administrator account.
Max. 16 characters (except ", &, ', :, <, >, and space)
Note
•
An empty string is not allowed.
admin
Document Version 2015-01