Panasonic KX-UTG200 Setup Manual page 330

5.9.2 Per Line - Call Control Settings
Web User Interface Reference
RESOURCELIST_URI
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CW_ENABLE
Value Format
Description
Value Range
Default Value
BLOCK_CALLER_ID
Value Format
Description
Value Range
Default Value
Web User Interface Reference
330 Administrator Guide
Feature Key Synchronization (Page 145)
String
Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
•
When the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Empty string
Resource List URI (Page 145)
Boolean
Specifies whether automatic call waiting is enabled.
•
Y/Yes (Enable Call Waiting)
•
N/No (Disable Call Waiting)
Y
Boolean
Specifies whether to make calls without transmitting the phone number
to the called party.
•
Y/Yes (Enable block caller ID)
•
N/No (Disable block caller ID)
N
Block Caller ID (Page 147)
Document Version 2015-01