Panasonic KX-UTG200 Setup Manual page 339

Value Range
Default Value
Web User Interface Reference
LINE_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_USER_AGENT
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_AUTHID
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2015-01
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Empty string
SIP URI (Page 123)
Boolean
Specifies whether a line is enabled or disabled.
•
Y: Enable line
•
N: Disable line
N
Enable Line (Page 122)
String
Specifies the text string to send as the user agent in the headers of SIP
messages.
Max. 64 characters
Note
•
An empty string is not allowed.
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
SIP User Agent (Page 126)
String
Specifies the authentication ID required to access the SIP server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Empty string
Authentication ID (Page 126)
5.9.3 Per Line - SIP Settings
Administrator Guide 339