Link Speed/Duplex Mode; Lan Port; Pc Port; Lldp Settings - Panasonic KX-UTG200 Setup Manual
Hide thumbs
Also See for KX-UTG200:
- Administrator's manual (348 pages) ,
- Operating instructions manual (100 pages) ,
- Getting started (17 pages)
Table of Contents
Advertisement
4.3.4.1 Link Speed/Duplex Mode
LAN Port
Description
Value Range
Default Value
PC Port
Description
Value Range
Default Value
4.3.4.2 LLDP Settings
Enable LLDP
Description
Value Range
Default Value
Configuration File Reference
Document Version 2015-01
Selects the connection mode (link speed and duplex mode) of the LAN
port.
•
Auto Negotiation
•
1000 Mbps/Full Duplex
•
100 Mbps/Full Duplex
•
100 Mbps/Half Duplex
•
10 Mbps/Full Duplex
•
10 Mbps/Half Duplex
Auto Negotiation
Selects the connection mode (link speed and duplex mode) of the PC
port.
•
Auto Negotiation
•
1000 Mbps/Full Duplex
•
100 Mbps/Full Duplex
•
100 Mbps/Half Duplex
•
10 Mbps/Full Duplex
•
10 Mbps/Half Duplex
Auto Negotiation
Selects whether to enable or disable sending and receiving LLDP
frames.
Note
•
You should specify "Yes" for only one of "VLAN", "LLDP" or
"CDP".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "VLAN" > "LLDP" >
"CDP". Therefore, if "Yes" is specified for both "VLAN" and
"LLDP", the VLAN-related settings are used.
•
Yes
•
No
Yes
LLDP_ENABLE (Page 275)
4.3.4 Ethernet Port Settings
Administrator Guide
103
Advertisement
Chapters
Table of Contents
