Value Range
Default Value
Configuration File Reference
SRV lookup Prefix for UDP
Description
Value Range
Default Value
Configuration File Reference
SRV lookup Prefix for TCP
Description
Value Range
Default Value
Configuration File Reference
4.5.1.10 Transport Protocol for SIP
Transport Protocol
Description
Document Version 2015-01
•
Yes
•
No
Note
•
If you select [Yes], the unit will perform a DNS SRV lookup for
a SIP registrar server, SIP proxy server, SIP outbound proxy
server, or SIP presence server. If you select [No], the unit will
not perform a DNS SRV lookup for a SIP registrar server, SIP
proxy server, SIP outbound proxy server, or SIP presence
server.
Yes
SIP_DNSSRV_ENA (Page 344)
Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using UDP.
Note
•
This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Max. 32 characters
_sip._udp.
SIP_UDP_SRV_PREFIX (Page 344)
Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.
Note
•
This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Max. 32 characters
_sip._tcp.
SIP_TCP_SRV_PREFIX (Page 344)
Selects which transport layer protocol to use for sending SIP packets.
4.5.1 SIP Settings [Line 1]–[Line n]
Administrator Guide
127