Opening/Closing The Web Port; Access Levels (Ids And Passwords) - Panasonic KX-UTG200 Setup Manual

1.1.5 Web User Interface Programming
The Web user interface will operate correctly in the following environments:
Operating System
Web Browser
Language (recommended)

Opening/Closing the Web Port

To access the Web user interface, you must open the unit's Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
For details about additional features available with direct commands, see Section 3 Phone User Interface
Programming.
Configuring Settings from the Unit
To open the unit's Web port
1.
On the Home screen, select
2.
Press [#][5][3][4].
3.
Select
Yes
To close the unit's Web port
1.
On the Home screen, select
2.
Press [#][5][3][4].
3.
Select
No
Configuring Settings from the Web User Interface
To close the unit's Web port
1.
In the Web user interface, click [Web Port Close].
2.
Click OK.
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
The port close timer configured through the Web user interface expires (® see [Port Close
Timer] in 4.4.4.1 Web Server Settings).
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (® see
"HTTPD_PORTOPEN_AUTO" in 5.5.7 HTTP Settings). In this case, the Web port cannot be opened
or closed from the unit or web user interface. Please recognize the possibility of unauthorized access
to the unit by opening the Web port continuously.

Access Levels (IDs and Passwords)

2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
32 Administrator Guide
Microsoft
Windows Internet Explorer
Windows Internet Explorer 9
English
.
.
.
.
Windows XP or Windows 7
® ®
7, Windows Internet Explorer 8, or
®
Document Version 2015-01