Supports Rport (Rfc); Enable Ssaf (Sip Source Address Filter) - Panasonic KX-UTG200 Setup Manual

Supports Rport (RFC 3581)
Description
Value Range
Default Value
Configuration File Reference
STUN
Description
Value Range
Default Value
Configuration File Reference
4.5.1.15 Security

Enable SSAF (SIP Source Address Filter)

Description
Value Range
Default Value
Configuration File Reference
Document Version 2015-01
Selects whether to add the 'rport' parameter to the top Via header field
value of requests generated. For details, refer to RFC 3581.
•
Yes
•
No
No
SIP_ADD_RPORT (Page 346)
Select whether to enable the STUN service.
•
Yes
•
No
No
SIP_STUN_ENABLE (Page 346)
Selects whether to enable SSAF (SIP Source Address Filter) for the
SIP servers (registrar server, proxy server, and presence server).
•
Yes
•
No
Note
•
If you select [Yes], the unit receives SIP messages only from
the source addresses stored in the SIP servers (registrar
server, proxy server, and presence server), and not from other
addresses. However, if [Outbound Proxy Server Address] in
4.5.1.4 Outbound Proxy Server is specified, the unit also
receives SIP messages from the source address stored in the
SIP outbound proxy server.
No
SIP_DETECT_SSAF (Page 349)
4.5.1 SIP Settings [Line 1]–[Line n]
Administrator Guide 131