Configuration File Reference
International Call Prefix
Description
Value Range
Default Value
Configuration File Reference
Country Calling Code
Description
Value Range
Default Value
Configuration File Reference
National Access Code
Description
Value Range
Default Value
Configuration File Reference
Hold Recall Timer
Description
Value Range
Default Value
Configuration File Reference
Document Version 2015-01
MACRODIGIT_TIM (Page 288)
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters (consisting of 0–9, *, and #)
Not stored.
INTERNATIONAL_ACCESS_CODE (Page 289)
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters (consisting of 0–9)
Not stored.
COUNTRY_CALLING_CODE (Page 289)
When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Max. 8 characters (consisting of 0–9, *, and #)
Not stored.
NATIONAL_ACCESS_CODE (Page 289)
Specifies the duration of the hold recall timer. If set to "0", the function
is disabled.
0–240 (0: Disable)
60
HOLD_RECALL_TIM (Page 290)
4.6.1 Call Control
Administrator Guide
141