Panasonic KX-UTG200 Setup Manual page 396

8.1.2 14.11.1 Software File Version 03.111
•
5.5.5 Ethernet Port Settings (Page 276)
•
5.5.7 HTTP Settings
→
HTTP_AUTH_ID (Page 280)
→
HTTP_AUTH_PASSWORD (Page 281)
→
HTTP_ENABLE_PROXY (Page 281)
→
HTTP_PROXY_SVR_ADDR (Page 281)
→
HTTP_PROXY_SVR_PORT (Page 281)
→
WEB_LANGUAGE (Page 281)
→
WEB_SERVER_PORT (Page 282)
→
WEB_SERVER_CLOSE_TIMER (Page 282)
•
5.6.1 Call Control Settings
→
DIRECT_TRANSFER_ENABLE (Page 291)
→
DND_HARD_KEY_ENABLE (Page 292)
→
REJECT_CALL_NUMBER[1-30] (Page 292)
•
5.6.2 Telephone Settings
→
DISABLE_FACTORY_RESET_FROM_ADMIN (Page 295)
→
BLF_DATA_FROM_FLEX_KEY (Page 296)
→
DIR_CMD_FACTORY_RESET (Page 296)
→
DIR_CMD_ENABLE_EMBEDDED_WEB (Page 296)
→
DIR_CMD_ENABLE_PORT_MIRROR (Page 296)
→
DIR_CMD_DISABLE_TOUCH_SCREEN (Page 296)
→
DEFAULT_ACCESS_LEVEL (Page 297)
•
5.6.4 Distinctive Ring (Page 297)
•
5.6.6 Per Multicast Group - Multicast Paging
→
MPAGE_PORT (Page 299)
•
5.8.3 All Lines - Call Control Settings
→
SIP_PASSWD_CHECK_SPECIAL_CHAR (Page 319)
•
5.9.1 Per Line - VoIP
→
RTCP_INTVL (Page 322)
→
VAD_ENABLE (Page 326)
→
REFER_TO_USE_POUND (Page 326)
→
CNG_ENABLE (Page 326)
•
5.9.2 Per Line - Call Control Settings
→
AUTO_KEY_ASSIGNMENT (Page 337)
→
AUTO_ANS_ENABLE (Page 338)
•
5.9.3 Per Line - SIP Settings
→
REFER_TO_IP_FMT_ON_XFER (Page 353)
→
REFER_TO_IP_FMT_ON_CONF (Page 354)
→
SIP_ADD_ROUTE (Page 354)
•
5.10 Diagnostic Settings (Page 354)
396 Administrator Guide Document Version 2015-01