Panasonic KX-UTG200 Setup Manual page 259

Description
Value Range
Default Value
Web User Interface Reference
USR_PROV_SVR_URL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
USR_PROV_SVR_AUTH_ID
Value Format
Description
Value Range
Default Value
Web User Interface Reference
USR_PROV_SVR_AUTH_PASSWORD
Value Format
Document Version 2015-01
Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.
Max. 15 characters
Note
•
An empty string is not allowed.
check-sync
Header Value for Resync Event (Page 189)
String
Specifies the Provisioning Server URL.
Note
•
The format of the IP address must be in dotted-decimal
notation, FQDN, or URL, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
Max. 1024 characters
Empty string
Provision Server (Page 186)
String
Specifies the authentication ID used to access the provisioning server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Empty string
Authentication ID (Page 187)
String
5.4.6 Provisioning Settings
Administrator Guide 259