Feature Key Synchronization
Description
Value Range
Default Value
Configuration File Reference
Conference Server URI
Description
Value Range
Default Value
Configuration File Reference
Resource List URI
Description
Value Range
Document Version 2015-01
Selects whether to synchronize the feature key settings, configured via
the Web user interface or phone user interface, between the unit and
the portal server that is provided by your phone system dealer.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
Feature Key Synchronization, consult your phone system
dealer.
•
Yes
•
No
No
FEATURE_KEY_SYNCHRO_ENABLE (Page 329)
Specifies the Uniform Resource Identifier string for a conference server,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:conference@example.com".
Note
•
In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part
("example.com" in the example above) can contain up to 127
characters.
Max. 195 characters
Not stored.
CONFERENCE_SERVER_URI (Page 327)
Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
•
When the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
4.6.2 Call Control [Line 1]–[Line n]
Administrator Guide
145