Panasonic KX-UTG200 Setup Manual page 272

5.5.2 IPv6 Settings
IPV6_DHCP_ENABLE
Value Format
Description
Value Range
Default Value
IPV6_DHCP_DNS_ENABLE
Value Format
Description
Value Range
Default Value
IPV6_STATIC_IP_ADDR
Value Format
Description
Value Range
Default Value
IPV6_STATIC_IP_PREFIX_LEN
Value Format
272 Administrator Guide
Boolean
Specifies whether to assign the IPv6 address automatically (DHCPv6)
or manually (static).
•
Y/Yes (Assigns IPv6 addresses automatically (DHCPv6))
•
N/No IPv6 addresses are assigned manually (use
IPV6_STATIC_IP_ADDR, IPV6_STATIC_IP_PREFIX_LEN, and
IPV6_STATIC_DEFAULT_GATEWAY)
Y
Boolean
Specifies whether to receive DNS server addresses automatically or to
assign the DNS server addresses (up to 2) manually.
Note
•
This setting is available only when "IPV6_DHCP_ENABLE" is
set to "Y".
•
Y/Yes (Receives the DNS server address automatically)
•
N/No (Use "IPV6_STATIC_DNS1_SERVER" and
"IPV6_STATIC_DNS2_SERVER")
Y
String
Specifies the IPv6 address for the unit.
Note
•
This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
•
When you specify this parameter, you must specify
"IPV6_STATIC_IP_PREFIX_LEN"
and "IPV6_STATIC_DEFAULT_GATEWAY" together in a
configuration file.
Max. 39 characters (IPv6 address)
Empty string
Integer
Document Version 2015-01