Default Value
Configuration File Reference
4.6.6.3 Ringing Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.6.6.4 Stutter Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Document Version 2014-04
60,500,440
BUSY_TONE_TIMING (Page 237)
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
1–9 characters
0, 200–2000 (0: No tone)
440,480
RINGBACK_TONE_FRQ (Page 238)
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
1–60 characters
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
RINGBACK_TONE_TIMING (Page 238)
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
1–9 characters
0, 200–2000 (0: No tone)
350,440
DIAL_TONE4_FRQ (Page 239)
4.6.6 Tone Settings
Administrator Guide
141