4.6.2.3 Call Features
Block Caller ID
Description
Value Range
Default Value
Configuration File Reference
Block Anonymous Call
Description
Value Range
Default Value
Configuration File Reference
Do Not Disturb
Description
Value Range
Default Value
Configuration File Reference
Return Code When DND
Description
Document Version 2015-01
Selects whether to make calls without transmitting the phone number
to the called party.
Note
•
Availability depends on your phone system.
•
Yes
•
No
No
BLOCK_CALLER_ID (Page 330)
Selects whether to reject incoming calls that do not show the caller's
number.
•
Yes
•
No
No
BLOCK_ANONYMOUS_CALL (Page 331)
Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
•
If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
•
Yes
•
No
No
DND_ENABLE (Page 331)
Specifies the return code sent when the unit is in Do Not Disturb mode.
4.6.2 Call Control [Line 1]–[Line n]
Administrator Guide
147