Panasonic KX-UTG200 Setup Manual page 241

Description
Value Range
Default Value
CFG_ROOT_CERTIFICATE_PATH2
Value Format
Description
Value Range
Default Value
CFG_ROOT_CERTIFICATE_PATH3
Value Format
Description
Document Version 2015-01
Specifies the URL of the root certificate. When this parameter is
specified, the Embedded root certificate is ignored. This setting should
only be placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Max. 1024 characters
Empty string
String
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Max. 1024 characters
Empty string
String
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
5.3.1 Certificate Settings
Administrator Guide 241