Panasonic KX-UTG200 Setup Manual page 305

Default Value
RINGBACK_TONE_RPT
Value Format
Description
Value Range
Default Value
RINGBACK_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DIAL_TONE4_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DIAL_TONE4_GAIN
Value Format
Description
Document Version 2015-01
0
Boolean
Specifies whether the ringback tone is repeated.
•
Y/Yes (Repeat)
•
N/No (No Repeat)
Y
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
Tone Timings (Page 160)
Integer
Specifies the dual-tone frequencies, in hertz, of Dial Tone 4 (stutter dial
tones) to notify that a voice mail is waiting, using 2 whole numbers
separated by a comma.
0, 200–2000 (0: No tone)
350,440
Tone Frequencies (Page 160)
Integer
Specifies the gain, in decibels, of Dial Tone 4 (stutter-type dial tone).
5.6.8 Tone Settings
Administrator Guide 305