Panasonic KX-UTG200 Setup Manual page 322

Hide thumbs Also See for KX-UTG200:
Table of Contents

Advertisement

5.9.1 Per Line - VoIP
Web User Interface Reference
DSCP_RTP
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DSCP_RTCP
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_INTVL
Value Format
Description
Value Range
Default Value
MAX_DELAY
Value Format
Description
Value Range
Default Value
322
Administrator Guide
G729A (Annexb) (Page 139)
Integer
Selects the DSCP level of DiffServ applied to RTP packets.
0–63
0
RTP Packet QoS (DSCP) (Page 134)
Integer
Selects the DSCP level of DiffServ applied to RTCP packets.
0–63
0
RTCP Packet QoS (DSCP) (Page 134)
Integer
Specifies the interval, in seconds, between RTCP packets.
5–65
5
Integer
Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
3–50 (´ 10 ms)
Note
This setting is subject to the following conditions:
This value must be greater than "NOM_DELAY"
This value must be greater than "MIN_DELAY"
"NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
20
Document Version 2015-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-utg300

Table of Contents