Configuring The Network Settings Of The Unit - Panasonic KX-UTG200 Setup Manual

Configuring the Network Settings of the Unit

The following procedures explain how to change the network settings via the unit.
For details about the individual network settings that can be configured via the unit, refer to the Operating
Instructions on the Panasonic Web site (® see Introduction).
For details about configuring network settings via the Web user interface, see 4.3.1 Basic Network
Settings.
Settings for IPv4
To configure network settings automatically
1.
On the Home screen, select
2.
Select "Network Settings", and then press [ENTER].
3.
Select "Network", and then press [ENTER].
4.
Select "IPv4", and then press [ENTER].
5.
Select "DHCP", and then select
6.
Select "Auto DNS", and then select
•
Select
No
(secondary DNS server) manually.
To configure network settings manually
1.
On the Home screen, select
2.
Select "Network Settings", and then press [ENTER].
3.
Select "Network", and then press [ENTER].
4.
Select "IPv4", and then press [ENTER].
5.
Select "DHCP", and then select
6.
Select "Auto DNS", and then select
7.
Enter the IP address, subnet mask, default gateway, DNS1 (primary DNS server), and, if necessary, DNS2
(secondary DNS server).
Settings for IPv6
To configure network settings automatically
1.
On the Home screen, select
2.
Select "Network Settings", and then press [ENTER].
3.
Select "Network", and then press [ENTER].
4.
Select "IPv6", and then press [ENTER].
5.
Select "Enable IPv6 DHCP", and then select
6.
Select "IPv6 Auto DNS", and then select
•
Select No
To configure network settings manually
1.
On the Home screen, select
2.
Select "Network Settings", and then press [ENTER].
3.
Select "Network", and then press [ENTER].
4.
Select "IPv6", and then press [ENTER].
5.
Select "Enable IPv6 DHCP", and then select
6.
Select "IPv6 Auto DNS", and then select
7.
Enter the IP addresses and other settings as necessary.
Document Version 2015-01
.
Yes .
Yes
to enter the addresses for DNS1 (primary DNS server) and, if necessary, DNS2
.
.
No
No
.
to enter the addresses and other settings as necessary.
.
.
.
.
Yes
.
Yes
.
No
.
No
1.1.2 Basic Network Setup
Administrator Guide 29