Proxy Server Settings; Enable Proxy - Panasonic KX-UTG200 Setup Manual

Authentication Password
Description
Value Range
Default Value

4.3.7.3 Proxy Server Settings

Enable Proxy

Description
Value Range
Default Value
Proxy Server Address
Description
Value Range
Default Value
Proxy Server Port
Description
Value Range
Default Value
4.3.8 Global Address Detection
This screen allows you to configure STUN server settings for the Global Address Detection feature. The global
IP address of the network the unit is connected to will be detected by STUN Protocol. If the global IP address
has changed, the new address will be registered to the SIP server.
Document Version 2015-01
Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Max. 127 characters
Not stored.
Selects whether to use the proxy server.
•
Yes
•
No
No
Specifies the IP address or FQDN of the proxy server.
Max. 127 characters
Note
•
You cannot leave this field empty if [Enable Proxy] is set to
[Yes].
Not stored.
Specifies the port number of the proxy server.
1–65535
8080
4.3.8 Global Address Detection
Administrator Guide 111