Printing A Network Interface Status Page - Kyocera FS 2020D Advanced Operation Manual

Adjust/
Maintenance
>>Print Network
Status Page ?
4-12

Printing a Network Interface Status Page

You can print out a status page for the network interface. The network
status page shows the network addresses, and other information under
various network protocols about the network interface.
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.
The options available in Adjust/Maintenance are as follows:
•
Restart Printer
•
Service
IMPORTANT
Service
personnel for maintenance work. There is no need for customers to
use this menu.
1
Press [MENU].
2
Press or
>
3
while Adjust/Maintenance > is displayed.
Press
4
Press or
5
Press .
6
Press or
appears.
7
Press [OK]. A question mark (?) appears.
8
Press [OK]. Processing appears and a status page is printed out.
9
When printing ends, the display returns to Ready.
is primarily a menu used by service
repeatedly until Adjust/Maintenance > appears.
repeatedly until >Service > appears.
repeatedly until >>Print Network Status Page
Connecting and Printing