Indicators In Message Display - Kyocera FS 2020D Advanced Operation Manual

Using the Operation Panel

Indicators in Message Display

Ready, Data, and Attention Indicators
The following indicators light during normal operation and whenever the
printer needs attention. Depending on the status of lighting, each
indicator has the following meaning:
Indicator
Ready
Description
Flashing. Indicates an error that you can resolve. For
details, refer to the Troubleshooting section in the
Operation Guide.
On. Indicates that the printer is ready and on-line. The
printer prints the data it receives.
Off. Indicates that the printer is off-line. Data can be
received but will not be printed. Also, indicates when
printing is automatically stopped due to an error condition.
For details, refer to the Troubleshooting section in the
Operation Guide.
Flashing. Indicates that a data is being received.
On. Indicates either that data received is being processed
before printing starts, or that data received is being written
to or read from a CompactFlash card, hard disk, RAM disk,
or USB flash memory.
Flashing. Indicates that the printer requires maintenance
or is warming up.
On. Indicates the occurrence of a problem or an error. For
details, refer to the Troubleshooting section in the
Operation Guide.
7-5