Kyocera FS 2020D Advanced Operation Manual page 154

>>Format ?
>Memory Card
Using the Operation Panel
Format (Formatting hard disk)
A new hard disk must be formatted before it can be used in the printer.
Formatting allows data to be written to the hard disk.
This menu is displayed only when the optional hard disk is installed on
the printer.
Note
Formatting will destroy any existing data on a storage device
including a used CF card.
Formatting of the hard disk must be executed from the printer.
1
while >Hard Disk > is displayed.
Press
2
>>Format appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK].
Processing appears and formatting of the hard disk starts. When
the formatting is successfully completed, the display returns to
Ready.
Memory Card (Using the CF card)
The printer is equipped with a slot for a CF card (memory card). By
inserting a CF card into the printer, the following operations become
available.
•
Format (Formatting CF card)
For details about the handling of the CF card, refer to CompactFlash
(CF) Card on page 8-6.
Note
The Memory Card menu options are only displayed when
a CF card is installed in the printer .
1
while Device Common > is displayed.
Press
2
Press or
>
repeatedly until >Memory Card > appears.
7-57