Kyocera FS 2020D Advanced Operation Manual page 119

>Quick Copy
?Harold
>Quick Copy
?Arlen
>Arlen
?Report
>Report
Copies
>Report
Copies
>Report
Delete
7-22
Printing Remaining Copies of a Proof-and-Hold Job
1
while Job Box > is displayed.
Press
2
Press
entered in the printer driver (Harold, in this example) also appears.
3
Press [OK]. A blinking question mark (?) appears before the user
name.
4
Press
example.
5
Press [OK]. The job name entered in the printer driver (Report, in
this example) appear with a blinking question mark (?) before the
letters.
6
Press
7
Press [OK]. The number of copies to be printed can be set. To
increase the copy count, press
001
.
8
Press [OK] to finalize the copy count. The printer prints the specified
number of copies for the job.
Deleting a Proof-and-Hold Job
1
Follow steps 1 through 6 in the above section to let the title of the job
to be deleted displayed.
2
When the title of the job to be deleted is displayed, e.g. Report,
press [OK]. The cursor (_) below the copy count starts to blink.
001
3
Press
4
Press [OK]. The message Processing appears and the stored job
is deleted.
repeatedly until >Quick Copy appears. The name
or
to display the desired user name, Arlen, in this
or
or to scroll to the desired job title.
; to decrease the copy count, press
repeatedly until Delete appears below the title.
Using the Operation Panel