General Information - Kyocera FS 2020D Advanced Operation Manual

7-2

General Information

This chapter provides the information you need to configure the Ecosys
printer. In general you need to use the operation panel only to make
default settings. You can make most changes to the printer settings
using the printer driver through the application software.
Note
Changes to printer settings made using a software
application override changes made using the operation panel.
You can also access the printer's various settings from a remote
location, by using the control panel, the printer driver or other utilities
such as the Status Monitor Utility. Other printer utilities can be installed
using the CD-ROM supplied with the printer.
The chapter describes the operation panel in detail, including its menus
and the procedures for changing various printer settings.
Using the Operation Panel