Print Quality (Setting Print Quality) - Kyocera FS 2020D Advanced Operation Manual

>Print Quality >
>>KIR Mode
? On
7-42

Print Quality (Setting print quality)

In Print Quality menus, you can set the KIR mode, EcoPrint mode, and
other settings.
The options available in Print Quality are as follows:
•
KIR Mode (Selecting the KIR mode)
•
EcoPrint Mode (Selecting the EcoPrint mode)
•
Resolution (Selecting the Print Resolution)
•
Print Density (Selecting the Print Density)
1
while Print Settings > is displayed.
Press
2
repeatedly until >Print Quality > appears.
Press or
KIR Mode (Selecting the KIR mode)
This printer incorporates the KIR (Kyocera Image Refinement)
smoothing function. KIR users the software to enhance resolution,
resulting in high quality printing at resolution of 600 dpi and 300 dpi. The
default is On. KIR has no effect on the printing speed.
with KIR Off
Note
Set the print density to 03 when setting the KIR mode. For
details on the print density, refer to Print Density (Selecting the
print density) on page 7-43.
1
while >Print Quality > is displayed.
Press
2
repeatedly until >>KIR Mode appears.
Press or
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
with KIR On (default)
or .
Using the Operation Panel