Printing Network Interface Status Page - Kyocera EcoPro EP C170N User Manual

ADVANCED OPERATION GUIDE
Printing a Network Interface Status Page
You can have your printer print out a network status page when the printer
prints the status page. The network status page shows the network
addresses, and other information under various network protocols about
the network interface card. The default setting is Off (print disable).
NOTE:
Printing out a network interface status page may not be possible
with the optional network interface card. For details, see the manual for
the network interface.
1 Press [MENU].
2
Press [OK] ([ENTER]) repeatedly until
Interface > appears.
3
If the interface is other than network, press
[OK] ([ENTER]). A blinking question mark
(?) appears.
4 Press or
appears. Press [OK] ([ENTER]).
5 Press and then press
until the display shows >Network Status
Page.
6 The default setting is Off. If it is set to On,
press [OK] ([ENTER]). A blinking question
mark (?) appears.
7 Press or
8 Press [OK] ([ENTER]) again.
repeatedly until Network
or repeatedly
to select On.
Using the Operator Panel
Interface
USB
Interface
? USB
Interface
? Network
>Network Status
Page Off
>Network Status
Page ? Off
>Network Status
Page ? On
2-35
>