Kyocera FS 2020D Advanced Operation Manual page 141

>Page Set
>>Copies
7-44
4
Select the print density from five steps from 01 (light) to 05 (dark)
using the
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Page Set (Setting pagination)
In Page Set menus, you can set the number of copies, page orientation,
and other settings regarding pagination.
The options available in Page Set are as follows:
•
Copies (Number of copies)
•
Orientation (Print orientation)
•
LF Action (Linefeed)
•
CR Action (Carriage-Return)
•
Wide A4 (Wide A4 pitch)
1
while Print Settings > is displayed.
Press
2
Press or
>
Copies (Number of copies)
You can set the number of copies of each page to be printed for the
current interface.
1
while >Page Set > is displayed.
Press
2
Press or
3
Press [OK]. A blinking cursor (_) appears.
001
4
Press or
blinking cursor. The number of copies can be set between 1 and
999. Use
5
When the desired size is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.
Orientation (Print orientation)
You can select portrait (upright) or landscape (sideways) page
orientation.
Portrait Orientation
A
or .
repeatedly until >Page Set
repeatedly until >>Copies appears.
to increase or decrease, respectively, the value at the
and to move the cursor right and left.
Landscape Orientation
A
> appears.
Using the Operation Panel