Kyocera FS 2020D Advanced Operation Manual page 157

>Timer
>>Form Feed
Time Out 030sec.
7-60
Timer (Timer setting)
This specifies timer-related settings such as the automatic form-feed
timeout and the timeout settings for Auto Sleep.
The options available in Timer are as follows:
•
Form Feed Time Out (Automatic form feed timeout setting)
•
Sleep Timer (Sleep timer timeout time)
•
Auto Error Clear (Auto error clear setting)
•
Error Clear Timer (Setting the error clear time)
•
Auto Panel Reset (Auto panel reset settings)
•
Panel Reset Timer (Setting the panel reset timer)
•
Auto Sleep (Setting the sleep timer)
1
while Device Common > is displayed.
Press
2
Press or
>
Form Feed Time Out (Automatic form feed timeout setting)
If the printer receives no data for a certain period, it will time out and
release the current interface. It prints whatever data it has in its buffer
and feeds out the page. The default form feed timeout time is 30
seconds.
1
while >Timer > is displayed.
Press
2
Press or
3
Press [OK]. A blinking cursor (_) appears.
4
Press or
cursor and set the desired time. The timeout time can be between 5
and 495 seconds, in 5-second increments. Use
the cursor right and left.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
repeatedly until >Timer > appears.
repeatedly until >>Form Feed Time Out appears.
to increase or decrease the value at the blinking
and to move
Using the Operation Panel