File List - Kyocera FS 2020D Advanced Operation Manual

>Print
Fonts List ?
>Print Hard Disk

File List ?

>Print RAM Disk
File List ?
Using the Operation Panel
Print Fonts List
To help you decide in selecting a font, you can printout lists of the
internal fonts or the optional fonts.
1
while Report Print > is displayed.
Press
2
repeatedly until >Print Fonts List appears.
Press or
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a list of fonts with a sample and font ID (number) for
each of them.
Print Hard Disk File List
This allows you to print a list of the files on the hard disk.
This menu is displayed only when the optional hard disk is installed on
the printer.
IMPORTANT
This is only displayed when the printer has a hard disk
installed and the disk is correctly formatted.
1
while Report Print > is displayed.
Press
2
repeatedly until >Print Hard Disk File List
Press or
appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a list of files stored in a hard disk.
Print RAM Disk File List
This allows you to print a list of the files on the RAM disk.
IMPORTANT
This is displayed when RAM disk mode is enabled.
1
while Report Print > is displayed.
Press
2
repeatedly until >Print RAM Disk File List
Press or
appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a list of files stored in a RAM disk.
7-15