Kyocera FS 2020D Advanced Operation Manual page 57

>SSL Server
On
>>DES
Off
>>3DES
Off
>>AES
Off
>>IPP over SSL
Off
>>HTTPS
Off
>>DES
?Off
>IPSec
On
>IPSec
?On
4-10
SSL Server
This section explains the procedure for enabling SSL Server.
1
Enter the administrator ID and password. Then, if SSL Server is
set to Off, use
or
2
Press . Each time you press
3
Display the item you want to set and press [OK]. A blinking question
mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
IPSec
This section explains the procedure for enabling IPSec.
1
Enter the administrator ID and password. Then, if IPSec is set to
Off, use to select On.
or
2
Press [OK]. A blinking question mark (?) appears.
3
Press [OK] again.
4
Press [MENU]. The display returns to Ready.
to select On and press [OK].
or , the selection changes.
or .
Connecting and Printing