Kyocera FS 2020D Advanced Operation Manual page 111

7-14
1 Firmware Version
This item shows the version and release date of the printer firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related items:
•
MP tray paper size and type
•
Paper cassette size and type
•
Sleep time
•
Formfeed timeout time
3 Installed Options
This item shows the options installed in the printer:
•
Hard disk
•
Memory card (CompactFlash card)
4 Network Status
This item shows the IP address, subnet mask address, and default
gateway address for the network interface card in the printer.
5 Interface Information
This information shows the settings for all interfaces installed in the
printer.
6 Memory
This item shows:
•
Standard memory in the printer
•
Option memory slot status in megabytes
•
Total memory in the printer
•
Current status of the RAM disk
7 Emulation
This item shows all available emulations of the printer. The PCL 6
emulation is set as default when the printer is shipped from the
factory. The emulations are:
•
PCL 6
•
KPDL
•
Line Printer
•
IBM Proprinter
•
DIABLO 630
•
EPSON LQ-850
8 Page Information
This item shows the page related items:
•
Total printed page count
•
Total page count of each paper size
9 Consumable Status
This item shows the approximate level of remaining toner. When the
value is 100, the toner container is full. The closer to 0, the smaller
the amount of remaining toner.
Using the Operation Panel