Special Paper - Kyocera FS 2020D Advanced Operation Manual

Paper Handling

Special Paper

The following types of special paper can be used:
Paper type to be used
Thin paper (60 to 64 g/m²)
Thick paper (90 to 220 g/m²)
Colored paper
Recycled paper
Overhead projector transparencies
Cardstock
Envelopes
Label
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, envelopes, cardstock,
coated, or thick paper, feed the paper from the MP Tray.
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
printing. No liability will be assumed if moisture and so forth given off
during printing on special paper causes harm to the machine or operator.
Note
Before purchasing any type of special paper, test a sample
on the machine and check that printing quality is satisfactory.
Transparency
Transparencies must be fed to the MP Tray. One transparency can be
loaded at a time.
Transparencies must be able to withstand the heat of fusing during the
printing process. The recommended transparency product is 3M PP2500
(Letter, A4).
Transparencies must be placed on the MP tray with the long edge
towards the printer.
When unloading transparencies (e.g., for clearing jams), hold them
carefully by the edges to avoid leaving fingerprints on them.
Labels
Labels must be fed to the MP Tray. One label can be loaded at a time.
The basic rule for printing on adhesive labels is that the adhesive must
never come into contact with any part of the machine. Adhesive paper
sticking to the drum or rollers will damage the machine.
Paper type to be selected
Vellum
Thick
Color
Recycled
Transparency
Cardstock
Envelope
Labels
MP Tray
2-7