Adjust/
Maintenance
>>Print Network
Status Page ?
Printing Operation
Printing a Network Interface Status Page
You can print out a status page for the network interface. The network
status page shows the network addresses, and other information under
various network protocols about the network interface card. The default
setting is Off (print disable).
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Color Calibration
• Registration Normal
• Registration Details
• Restart Printer
• Service
Important Service is primarily a menu used by service
personnel for maintenance work. There is no need for
customers to use this menu.
1
Press [MENU].
2
Press
or
>
3
Press
while Adjust/Maintenance > is displayed.
4
Press
or
5
Press
.
6
Press
or
appears.
7
Press [OK] ([ENTER]). A question mark (?) appears.
8
Press [OK] ([ENTER]). Processing appears and a status page is
printed out.
9
When printing ends, the display returns to Ready.
repeatedly until Adjust/Maintenance > appears.
repeatedly until >Service > appears.
repeatedly until >>Print Network Status Page
2-9