Kyocera FS 2020D Advanced Operation Manual page 56

>AppleTalk
On
>AppleTalk
?On
>IPP
On
>IPP
?On
Connecting and Printing
AppleTalk
This section explains the procedure for enabling AppleTalk.
1
Enter the administrator ID and password. Then, if AppleTalk is set
to Off, use to select On.
or
2
Press [OK]. A blinking question mark (?) appears.
3
Press [OK] again.
4
Press [MENU]. The display returns to Ready.
IPP
This section explains the procedure for enabling IPP.
1
Enter the administrator ID and password. Then, if IPP is set to Off,
to select On.
use or
2
Press [OK]. A blinking question mark (?) appears.
3
Press [OK] again.
4
Press [MENU]. The display returns to Ready.
4-9