Javad ALPHA Operator's Manual page 63

Note that a log file opens immediately after turning AFRM on. This startup file is not
considered a file rotation event; the AFRM counter will not decrement.
-1
Values are 0 to [231
of log files will be created.
• Files (remain) - specifies the number of files left for the receiver to create in AFRM.
• Values are 0 to [231
• Automatically remove old files - when no free memory is available to log data,
automatically removes the earliest log file. If this parameter is enabled, your
receiver will erase the file with the earliest file creation time/date. AFRM must be
enabled to use this FIFO (First-In, First-Out) feature.
• The default value is off (disabled).
Data Recording Auto-start parameter
These radio buttons allow you to program your receiver's behavior in the event of a power failure.
Table below gives the different scenarios available and the results after power is restored to
the receiver. "Specified file" refers to the file name entered in the Always append to file
parameter.
Before Power Failure
1
Receiver data logged to
file specified.
2
Receiver data logged
to default file.
3
File specified; receiver
data logging not started.
4
No file specified;
receiver data logging off.
www.javad.com
]. The default value is 0 (zero). Zero means that an unlimited number
-1
]. The default value is zero.
Off
Data logging will not
resume when power is
restored.
Data logging will not
resume when power is
restored.
No file will open with
this name.
Data logging will not
start when power is
restored.
Data logging will not
start when power is
restored.
Configuring the GSM module for Internet access
Enabled Radio Button Results
On
Receiver will resume Receiver will resume data
data logging to the logging to the
same file when power same file when power is
is restored. restored.
A new log file will A new log file will open when
open when power is power is restored and data will
restored and data will log to this file.
log to this file.
No file will open with A log file with this name will
this name. open and data logging will start
Data logging will not after power is restored.
start when power is
restored.
Data logging will not A log file with a default name
start when power is will open and data logging will
restored. start after power is restored.
Configuration
TriPad Configuration
Always
63