Javad ALPHA Operator's Manual page 56

Configuration
Configuring the Receiver
Configuring the GSM module for Internet access
• RTK Parameters, Dynamics – select Static or Kinematic.
• RTK Parameters, Ambiguity fixing level – (not applicable to RTK Float) select either Low,
Medium, or High for indicator states of 95%, 99.5%, or 99.9%, respectively. The RTK
engine uses the ambiguity fix indicator when making decisions whether or not to fix
ambiguities. The higher the specified confidence level, the longer the integer ambiguity
search time.
9. For RTK measurings, click the Ports tab and set the following port parameters for the
serial port (Table 3-6), then click Apply (Figure 3-17 on page 57).
Note:
For post-processed measurings, keep the default values for these parameters.
Parameter
Input
Output
Period (sec)
56
Figure 3-16. Rover Configuration
Table 3-6. Receiver Parameters for the Ports Tab
Base Receiver
n/a (Leave the default.)
Select the type and format of
differential corrections.
Enter the interval at which the
receiver will transmit differential
corrections.
Rover Receiver
Select the same differential
correction format selected for the
Base.
Select "None".
n/a (Leave the default.)
www.javad.com