Javad ALPHA Operator's Manual page 54

Configuration
Configuring the Receiver
Configuring the GSM module for Internet access
Figure 3-13. Configure Receiver Positioning – MinPad for data recording
6. Click the Positioning tab and set the Elevation mask to 15 (Figure 3-14), then click Apply.
Figure 3-14. Configure Receiver Positioning – Elevation Mask
7. For the Base receiver, click the Base tab and set the following parameters (Figure 3-15 on
page 55), then click Apply.
• GPS/GLO at one time – enable
54
www.javad.com