Attendant Control Error Overview - Otto Bock Juvo Instructions For Use Manual

Error message
JS Static Timeout
Orientation Error
ASM Disconnected
Gyro Disconnected
Gyro Prf Active
Switch Short

7.4.4 Attendant control error overview

VR2 attendant control
Flashing LED Error/warning
Control unit fault
Attendant control fault
Joystick error
Communication
between the attendant con­
trol (joystick) and the con­
trol panel/controller
Juvo
Error no. Content
(None) Joystick holding time
exceeded
(None) Orientation error on
advanced
module (ASM)
(None) Advanced
module (ASM) dis­
connected from con­
troller
(None) Electronic track sta­
biliser (gyro module)
disconnected
controller
(None) Electronic track sta­
biliser (gyro module)
is activated
1E0D Short
external on/off switch
1E0C Short
external profile/mode
switch
Cause
Fault in the control unit
Defective attendant control Switch off attendant control and turn
Attendant control joystick
not in home position when
the unit is turned on
error Defective cable, loose plug
connection
Cause
Excessive
deflection
(control
drive system to pre­
vent potential dam­
age to the motors)
Defective joystick
Defective
stability stability
(ASM)
stability e.g. defective
connection,
break
Defective
stability
(ASM)
e.g. defective
connection to con­
from troller
Defective gyro mod­
ule
Electronic track sta­
biliser (gyro module)
is disrupted by the
movement of a differ­
ent means of trans­
portation
ship) in standby
Defective gyro mod­
ule
circuit on e.g. defective
connection to control
panel
circuit on
Defective switch or
control panel
Possible measure
Read error on the control panel and
take
"Wheelchair control unit error over­
view" table)
control panel off/on
Switch off attendant control and move
joystick
switching the unit on
Switch control panel off/on
Check cabling / plug connections
Maintenance and repair
Possible measure
joystick Switch control unit
detected off/on
unit stops
If error
replace control panel
/ joystick;
specialist dealer
advanced Contact
module dealer
plug Contact
cable dealer
advanced
module
cable Contact
dealer
When driving/stand­
ing in means of trans­
portation, select the
"No Assist" driving
profile for safety reas­
(e.g. train, ons
If error persists: con­
tact specialist dealer
cable Check cable connec­
tion and
function of the extern­
al switch
If error persists: con­
tact specialist dealer
corresponding action
to home position
persists:
contact
specialist
specialist
specialist
switching
(see
before
87