Iscsi Initiator Parameter Settings - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 3 Checking the Configuration Environment
3.2 Server Connection Preparation
For the user who installs the driver, select [Everyone] for normal operations.
If [Just me] is selected, users other than the one who installed the driver are not allowed to uninstall
or overwrite the installation of it.
The option that is selected here does not affect the operation of the ETERNUS Multipath Driver after
installation.
A screen to confirm execution of the installation appears.
4
Click the [Next] button.
When installation is complete, a message appears.
5
Click the [Close] button.
A screen to confirm whether to restart the computer appears.
6
Restart the server.
3.2.3

iSCSI Initiator Parameter Settings

The following procedure explains how to set the iSCSI initiator parameters. This section shows how to set an
iSCSI initiator name.
1
In [Administrative Tools], click [iSCSI Initiator].
2
For the first startup, the dialog box that are shown below appears.
If there is no problem with service startup settings, click the [Yes] button.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
24
P3AM-8462-01ENZ0