Chapter 11
Solution Configuration
This chapter describes the optimum solutions provided by the ETERNUS DX linking with software programs.
11.1
Continuous Business
■
Solution Overview
The ETERNUS DX can perform real time data transfers from the operation site to a remote site. Even if an
error occurs in the operation site, operations can continue by switching operation from the operation site to
the backup site. Data transfers to a remote site occur only between storage systems, not through servers,
which reduces the load on the server.
Support for multiple transfer methods also enables flexible backup systems to be configured according to the
operation environment.
Figure 11.1 Solution — Continuous Business
ETERNUS SF
AdvancedCopy Manager
Business server
CA/RA
ETERNUS DX
■
Configuration Procedure
Configure the system to perform Remote Advanced Copying (REC) by using ETERNUS SF Advanced Copy Man-
ager.
The business server is used as the ACM Agent and the operation management server is used as the ACM
Manager.
Register the business server (ACM Agent) and the business volumes that are to be backed up in the opera-
tion management server (ACM Manager).
REC related settings and connection path settings must be performed in the ETERNUS DX.
Operation site
SAN
Gateway
CA/RA
Operation management
server
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Gateway
W AN
133
Backup site
ETERNUS SF
AdvancedCopy Manager
Standby
SAN
CA/RA
CA/RA
ETERNUS DX
P3AM-8462-01ENZ0