Fujitsu ETERNUS DX200F Configuration Manual page 17

Chapter 2 Rack Installation
If the storage system is installed at the bottom of a rack, a space for the surplus of cables may not be
•
available in some racks, preventing the storage system from being pulled out when maintenance work
is required. In this case, secure a space of 1U or more at the bottom when installing the storage system.
To install an enclosure, power synchronized units, and UPS units in a single rack, mount the devices in
•
the following order (from bottom to top).
3
2
1
Installation
order
Rack
Controller enclosure
Power synchronized unit
UPS
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
17
P3AM-8462-01ENZ0