Fujitsu ETERNUS DX200F Configuration Manual page 26

Chapter 3 Checking the Configuration Environment
3.2 Server Connection Preparation
4
The currently set initiator name is displayed.
Click the [Change] button.
5
On the [iSCSI Initiator Name] screen, specify the initiator name and click the [OK] button.
To leave the initiator name unchanged, click the [OK] button.
To use the default initiator name, also click the [Change] button.
This allows you to continue to use this initiator name even after changing the "server name".
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
26
P3AM-8462-01ENZ0