Fujitsu ETERNUS DX200F Configuration Manual page 33

Chapter 4 Connecting Cables
4.3 Power Cord Connection
(2)
Fasten the plug of the power cord with the release tie.
Wrap the release tie around the power cord and fasten the release tie from either side. Make sure
that the release tie is not loose.
2
Connect the power cords to the socket.
Connect the plug at the other end of each power cord to the socket.
Connecting two cords to different two power supply facilities improves the availability of the power
supply facilities against failures.
Do Not
Do not use the server service outlet to connect a power cord for the ETERNUS
•
DX.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
33
P3AM-8462-01ENZ0